Output Shaft Assembly (Transfer) - Toyota Hilux Surf 1993 Owner's Manual

TF–22
TRANSFER – Component Parts (Output Shaft)
ASSEMBLY OF OUTPUT SHAFT
INSTALL OUTPUT SHAFT FRONT BEARING LOW GEAR
AND SUB GEAR
(a) Install the sub gear, thrust spring and spacer.
(b) Using snap ring pliers, install the snap ring.
(c) Apply MP grease to the needle roller bearing.
(d) Install the low gear with needle roller bearing to the
output shaft.
(e) Install the steel ball on the output shaft.
(f ) Install the No. 1 spacer.
(g) Using SST and a press, install a new bearing.
SST 09316–60010 (09316–00010, 09316–00040,
09316–00050)
(h) Select a snap ring that will allow minimum axial play
and install it on the shaft.
Maximum play: 0.10 mm (0.0039 in.)
Mark Thickness mm (in.)