Toyota Hilux Surf 1993 Owner's Manual page 350

AUTOMATIC TRANSMISSION
(b) Install the bolts as shown. Torque the bolts evenly.
Torque: 10 N–m (100 kgf–cm, 7 ft–Ibf )
2. WHEN REPLACING SOLENOID
Install the solenoid and torque the bolt.
Torque: 10 N–m (100 kgf–cm, 7 ft–lbf)
3. CONNECT CONNECTOR TO SOLENOID
4. INSTALL TRANSFER OIL PAN
(a) Remove any packing material and be careful not to
(b) Clean contacting surfaces of any residual packing
(c) Install the three magnets as shown in the figure.
– On–Vehicle Repair
drop the oil on the contacting surfaces of the oil pan
and transfer case.
material, using gasoline or alcohol.
AT–153