Glass Replacement; Front Door Assembly - Toyota Hilux Surf 1993 Owner's Manual

BODY – Front Door
REPLACEMENT OF GLASS
1. REMOVE GLASS CHANNEL WITH SCREWDRIVER OR
LIKE OBJECT
2. APPLY SOAPY WATER TO INSIDE OF WEATHER–
STRIP
3. INSTALL CHANNEL BY TAPPING IT WITH PLASTIC
HAMMER
ASSEMBLY OF FRONT DOOR
(See pages BO–4 and 5)
1. BEFORE INSTALLING PARTS, COAT THEM WITH MP
GREASE
(a) Apply MP grease to the sliding surface and the gears
of the window regulator.
NOTICE: Do not apply MP grease to the spring of the
window regulator.
(b) Apply MP grease to the sliding surface of the door
lock.
2. INSTALL WINDOW REGULATOR AND DOOR GLASS
(a) Place the glass in the door cavity.
(b) Place the regulator through the service hole.
(c) (wI Power Window)
Install the four regulator mounting bolts, then con–
nect the connector.
(w/o Power Window)
Install the three regulator mounting bolts.
(d) (w/o Ventilator Window)
Install the equalizer arm and temporarily tighten two
equalizer arm mounting bolts.
(e) Attach the glass to the window regulator with two
bolts.
BO–9