Transfer Precautions; Transfer Troubleshooting - Toyota Hilux Surf 1993 Owner's Manual

TF–3
PRECAUTIONS
When working with FIPG material, you must be observe the following.
• Using a razor blade and gasket scraper, remove all the old packing (FIPG) material from the gasket sur–
faces.
• Thoroughly clean all components to remove all the loose material.
• Clean both sealing surfaces with a non–residue solvent.
• Apply the seal packing in approx. 1 mm (0.04 in.) bead along the sealing surface.
• Parts must be assembled within 10 minutes of application. Otherwise, the packing (FIPG) material must
be removed and reapplied.
Problem
Hard to shift or will
not shift
Transfer jumps out of
gear
TRANSFER
TROUBLESHOOTING
Possible cause
Transfer faulty
Transfer faulty
– Troubleshooting
Remedy
Disassemble and inspect
transfer
Disassemble and inspect
transfer
Page
TF–4, 32
TF–4, 32