Toyota Hilux Surf 1993 Owner's Manual page 151

MT2–14
MANUAL TRANSMISSION –
(b) Using a snap ring pliers, remove the two bearing snap
rings.
6. SEPARATE INTERMEDIATE PLATE FROM TRANS–
MISSION CASE
(a) Using a plastic hammer, carefully tap the transmission
case.
(b) Pull the transmission case from the intermediate
plate.
7. REMOVE FRONT MAGNET
8. MOUNT INTERMEDIATE PLATE IN VISE
(a) Use two long clutch housing bolts, plate washers and
suitable nuts as shown.
NOTICE: Install the plate washers in reverse of normal.
Increase or decrease plate washers so that the bolt tip
and the front tip surface of the nut are aligned.
(b) Mount the intermediate plate in a vise.
9. REMOVE OIL SEPARATOR
Remove the two bolts and oil receiver.
COMPONENT PARTS REMOVAL