MANUAL TRANSMISSION
–
6. REMOVE NO.1 HUB SLEEVE, SHIFTING KEYS AND
SPRINGS FROM CLUTCH HUB NO.1
(a) Remove the No. 1 clutch hub from the No. 1 hub
sleeve.
(b) Push the shifting key spring with screwdriver, remove
the three shifting keys and key springs.
7. REMOVE NO. 2 HUB SLEEVE ASSEMBLY AND
THIRD GEAR
(a) Using a snap ring expander, remove the snap ring.
(b) Using a press, remove the No.2 hub sleeve, synchro–
nizer ring and 3rd gear.
8. REMOVE NO.2 HUB SLEEVE, SHIFTING KEYS AND
SPRINGS FROM NO.2 CLUTCH HUB
(a) Remove the No. 2 hub sleeve from the No. 2 hub
sleeve.
OUTPUT SHAFT
MT2–27