SUSPENSION AND AXLE
–
(e) Using a press, press in a new hub bolt.
(f) Install and tighten the nut and stake the bolt.
Torque: 147 N–m (1,500 kgf–cm, 108 ft–lbf)
(g) Install the deflector and torque the six bolts.
Torque: 64 N–m (650 kgf–cm, 47 ft–lbf)
ASSEMBLY OF REAR AXLE HUB
(See page SA–127)
1. PACK BEARING WITH MP GREASE
(a) Place MP grease in the palm of your hand.
(b) Pack grease into the bearing, and continuing until
the grease oozes out from the other side.
(c) Do the same around the bearing circumference.
2. COAT SIDE HUB WITH MP GREASE
Rear Axle Shaft and Axle Hub (Double Tire)
SA–131