Front Axle Hub Assembly - Toyota Hilux Surf 1993 Owner's Manual

SUSPENSION AND AXLE –
(b) Using SST, carefully drive in a new bearing outer
race.
SST 09608–30012
(Inside race 09608–04020, 09608–04100)
(Outside race 09608–04020, 09608–04060)
ASSEMBLY OF FRONT AXLE HUB
1. PACK BEARINGS WITH MP GREASE
(a) Place MP grease in the palm of your hand.
(b) Pack grease into the bearing, continuing until the
grease oozes out from the other side.
(c) Do the same around the bearing circumference.
2. COAT INSIDE OF HUB AND CAP WITH MP GREASE
3. INSTALL INNER BEARING AND OIL SEAL
Place inner bearing into the hub. Using SST, drive the oil
seal into the hub. Coat the oil seal with MP grease.
SST 09608–30012 (09608–04020, 09608–04100)
4. INSTALL AXLE HUB ON SPINDLE
(a) Place the axle hub on the spindle.
(b) Install the outer bearing and thrust washer.
5. ADJUST PRELOAD
(a) Install and torque the nut.
Torque: 34 N–m (350 kgf–cm, 25 ft–Ibf )
Front Axle Hub and Steering Knuckle (Front Axle Hub)
SA–13