Toyota Hilux Surf 1993 Owner's Manual page 502

PR–18
PROPELLER SHAFT – PROPELLER SHAFT
6. CONNECT REAR PROPELLER SHAFT FLANGE TO
COMPANION FLANGE ON TRANSFER
(a) Align the matchmarks on the flanges and connect the
flanges with four bolts and nuts.
(b) Torque the bolts and nuts.
Torque:
3VZ–E [MT]
76 N–m (780 kgf–cm, 56 ft–lbf)
Ex. 3VZ–E [MT]
74 N–m (760 kgf–cm, 54 ft–lbf)
7. CONNECT PROPELLER SHAFT FLANGE TO COM–
PANION FLANGE ON REAR DIFFERENTIAL
(a) Align the matchmarks on the flanges and connect the
flanges with bolts and nuts.
(b) Torque the bolts and nuts.
Torque:
3VZ–E [MT]
76 N–m (780 kgf–cm, 56 ft–lbf)
Ex. 3VZ–E [MT]
74 N–m (760 kgf–cm, 54 ft–lbf)