MANUAL TRANSMISSION
–
Disassembly of Transmission
(See pages
1. REMOVE RELEASE FORK AND BEARING
2. REMOVE BACK–UP LIGHT SWITCH
3. REMOVE CLUTCH HOUSING FROM TRANSMISSION
CASE
Remove the nine bolts and clutch housing.
4. REMOVE STRAIGHT SCREW PLUG, SPRING AND BALL
(a) Using a torx socket wrench, remove the screw plug
from the transfer adaptor.
(Torx socket wrench T40 09042–00020)
(b) Using a magnetic finger, remove the spring and ball.
5. REMOVE SHIFT LEVER CONTROL RETAINER
(a) Remove the four bolts and transmission shift lever
control retainer.
(b) Remove the four bolts, transfer shift lever control re–
tainer and select return spring.
6. REMOVE RESTRICT PINS
Disassembly of Transmission
MT1–26
to 28)
MT1–29