Toyota Hilux Surf 1993 Owner's Manual page 131

MANUAL TRANSMISSION –
(b) Place the shift fork No.2 into the groove of hub
(c) Install fork shaft No.2 to shift fork No.1 and No.2
21. INSTALL SHIFT FORK SHAFT NO.5
Install the shift fork shaft No.5 to reverse shift head
through the intermediate plate.
22. INSTALL SLOTTED SPRING PINS
Using a pin punch and hammer, drive in the two slotted
spring pins to the reverse shift head and shift fork.
23. CHECK INTERLOCK
(a) Shift fork shaft No. 1 to the 1 st speed position.
(b) No.2, No.3, No.4 and No.5 fork shafts should not
move.
24. INSTALL SNAP RINGS
Using pliers and a hammer, install the three snap rings.
Assembly of Transmission
sleeve No.2.
through the intermediate plate.
MT1–101