Toyota Hilux Surf 1993 Owner's Manual page 750

SR–16
STEERING – Steering Column (Tilt Steering Column)
(c) Using a plastic hammer, drive in the steering bolts.
INSTALL TILT LEVER LOCK BOLT, TILT LEVER
ASSEMBLY, TILT LEVER AND TILT SUB LEVER
(a) Install the tilt lever lock bolt to the upper column
tube.
(b) Install the tilt lever assembly with the screw.
(c) Install the tilt lever and the tilt sub lever.
INSTALL TWO TILT PAWLS
Temporarily install the tilt pawls.
8. ENGAGE AND ADJUST TILT PAWL
(a) Engage the tilt sub lever side pawl to the center of
the ratchet.
(b) While turning the tilt lever side collar, engage the tilt
lever side pawl to the ratchet completely.
(c) Tighten the nut.
Torque: 5.9 N–m (60 kgf–cm, 52 in.–lbf)
9. INSTALL TWO TILT PAWL STOPPERS