Show Crypto Map - Dell PowerConnect W-7200 Series Reference Manual

show crypto map

show crypto ipsec map
Descriptions
This command displays the IPsec map configurations.
Syntax
Parameter
map
Usage Guidelines
Use the show crypto map command to view configuration for global, dynamic and default map configurations.
Examples
The command show crypto map shows statistics for the global, dynamic and default maps.
(host) #show crypto map
Crypto Map "GLOBAL-MAP" 10000 ipsec-isakmp
Crypto Map Template"default-dynamicmap" 10000
IKE Version: 1
lifetime: [300 - 86400] seconds, no volume limit
PFS (Y/N): N
Transform sets={ default-transform, default-aes }
Crypto Map "GLOBAL-IKEV2-MAP" 10000 ipsec-isakmp
Crypto Map "default-local-master-ipsecmap" 9999 ipsec-isakmp
Crypto Map Template"default-local-master-ipsecmap" 9999
IKE Version: 1
lifetime: [300 - 86400] seconds, no volume limit
PFS (Y/N): N
Transform sets={ default-ml-transform }
Peer gateway: 10.4.62.9
Interface: VLAN 0
Source network: 172.16.0.254/255.255.255.255
Destination network: 10.4.62.9/255.255.255.255
Pre-Connect (Y/N): Y
Tunnel Trusted (Y/N): Y
Forced NAT-T (Y/N): N
Related Commands
Command
crypto map global-map
946 | show crypto map
Description
Description
Use this command to configure the default global map.
Mode
Config mode
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide