Related Commands - Dell PowerConnect W-7200 Series Reference Manual

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Parameter
Cert-Type
Description
Revoke Text
Secondary Key
Last Updated

Related Commands

Command
whitelist-db cpsec add mac-address <mac-
address>
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
approved-ready-for-cert: AP is valid, but is waiting to receive a certificate.
l
certified-factory-cert: AP has an approved factory-installed certificate
l
certified-controller-cert: AP has an approved certificate from the controller.
l
certified-hold-factory-cert: An AP is put in this state when the controller thinks the AP
l
has been certified with a factory certificate yet the AP requests to be certified again.
Since this is not a normal condition, the AP will not be reapproved as a secure AP until
a network administrator manually changes the status of the AP to verify that it is not
compromised.
certified-hold-controller-cert: An AP is put in this state when the controller thinks the
l
AP has been certified with a controller certificate yet the AP requests to be certified
again. Since this is not a normal condition, the AP will not be reapproved as a secure
AP until a network administrator manually changes the status of the AP to verify that it
is not compromised.
Type of certificate used by the AP.
switch-cert: AP received a certificate from the controller
l
factory-cert: AP has a factory-installed certificate
l
If you included an optional description when you added the AP to the campus AP whitelist,
that description will appear here.
If you included an optional revoke description when you manually revoked the AP, that
description will appear here.
For internal use only.
Date and time that the AP record was last updated in the database.
Description
Configure the campus AP whitelist for the control plane
security feature.
Licensing
Base operating system.
Command Mode
Enable mode on master or local controllers
show whitelist-db cpsec | 1347
Mode
Config mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents