Dell PowerConnect W-7200 Series Reference Manual page 1075

show ip mobile
show ip mobile
active-domains
binding [<host-ip>|<host-macaddr>|brief]
domain [<name>]
global
hat
host [<host-ip>|<host-macaddr>|brief]
packet-trace [<count>]
remote <host-ip>|<host-macaddr>
trace <ip-addr>|<mac-addr>|{force <ip-addr>|<mac-addr>}
traffic dropped|foreign-agent|home-agent|proxy|proxy-dhcp
trail <host-ip>|<host-macaddr>
tunnel
visitor [<host-ip>|<host-macaddr>|brief]
Description
Display statistics and configuration information for the mobile protocol.
Syntax
Parameter
active domains
binding
[<host-ip>]
[<host-macaddr>]
[brief]
domain [<name>]
global
hat
host
[<host-ip>]
[<host-macaddr>]
[brief]
packet-trace [<count>]
remote <host-ip>|<host-
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
IP mobility domains active on this switch
Display a list of Home Agent Bindings
Filter the Home Agent Bindings list to display data for a specific host IP address.
Filter the Home Agent Bindings list to display data for a specific host MAC
address.
Limit the output of this command to show just two lines of data.
Display subnet, VLAN and home agent information for all mobility domains, or
specify a mobility domain name to view data for that domain only.
View the current Mobility Agents global configuration
Display the Active Home Agent Table
Display a list of Mobile IP hosts.
Filter the Mobile Host List to display data for a specific host IP address.
Filter the Mobile Host List to display data for a specific host MAC address.
Limit the output of this command to show just two lines of data.
The output of this command shows when packets of different types were sent
between a source IPor MAC address and a destination IP or MAC address.
This is a debug command which can be used to identify the controller asso-
show ip mobile | 1075