Dell PowerConnect W-7200 Series Reference Manual page 594

Parameter
PAP Requests
PAP Accepts
PAP Rejects
MSCHAPv2 Requests
MSCHAPv2 Accepts
MSCHAPv2 Rejects
Mismatch Response
Users Expired
Unknown Response
Timeouts
AvgRespTime (ms)
Uptime (d:h:m)
SEQ first/last/free
Related Commands
Command
aaa authentication-server internal
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
594 | show aaa authentication-server internal
Description
Number of PAP requests received by the internal server.
Number of PAP requests accepted by the internal server.
Number of PAP requests rejected by the internal server.
Number of MSCHAPv2 requests received by the internal server.
Number of MSCHAPv2 requests accepted by the internal server.
Number of MSCHAPv2 requests rejected by the internal server.
Number of times the server received an authentication response to a request after another
request had been sent.
Number of users that were deauthenticated because they stopped responding.
Number of times the server did not recognize the response, possibly due to internal errors.
Number of times that the controller timed out an authentication request.
Time it takes the server to respond to an authentication request, in seconds.
Time elapsed since the last server reboot.
This internal buffer counter keeps track of the requests to the authentication server.
Description
Issue the command
internal to use the internal database on a local
controller for authenticating clients.
Licensing
Base operating system
aaa authentication-server
Command Mode
Enable or Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
Config mode