Dell PowerConnect W-7200 Series Reference Manual page 604

show aaa derivation-rules
show aaa derivation-rules [server-group <group-name>|user <name>]
Syntax
Parameter
<group-name>
<name>
Description
Show derivation rules based on user information or configured for server groups.
Example
The output of the following command shows that the server group group1 has the internal database configured as its
authentication server, and that there is a single rule assigned to that group. You can omit the <group-name>
parameter to show a table of all your server groups.
(host) #show aaa derivation-rules server-group group1
Server Group
Name Inservice
---- ---------
Internal
Server Rule Table
-----------------
Priority Attribute
-------- ---------
1 Filter-Id
Rule Entries: 1
The following data columns appear in the output of this command:
Parameter
Name
Inservice
trim-FDQN
match-FDQN
Priority
Attribute
604 | show aaa derivation-rules
Description
Name of a server group
Name of a user rule group
trim-FQDN match-FQDN
--------- ----------
Yes No
Operation Operand
--------- -------
equals nsFilter
Description
Name of the authentication server assigned to this server group
Specifies if the server is in service or out-of-service.
If enabled, user information in an authentication request is edited before the request is sent
to the server.
If enabled, the authentication server is associated with a specified domain.
The priority in which the rules are applied. Rules at the top of the list are applied before
rules at the bottom.
This is the attribute returned by the authentication server that is examined for Operation
Action Value Total Hits
------ ----- ----------
set vlan 111 24
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
New Hits
--------