Show Image Version - Dell PowerConnect W-7200 Series Reference Manual

show image version

Description
Display the current system image version on both partition 0 and 1.
Syntax
No parameters.
Example
The following example shows that the controller is running ArubaOS 3.4 and booting off partition 0:0.
(host) #show image version
----------------------------------
Partition
Software Version
Build number
Label
Built on
----------------------------------
Partition
Software Version
Build number
Label
Built on
The output of this command includes the following parameters:
Parameter
Partition
Software Version
Build number
Label
Built on
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
: 0:0 (/dev/hda1) **Default boot**
: AOS-W 3.3.2.0
: 18661
: 18661
: 2008-06-12 04:24:34 PDT
: 0:0 (/dev/hda1)
: AOS-W 3.3.2.0
: 18661
: 18661
: 2008-06-12 04:24:34 PDT
Description
Partition number and name. The default boot partition will display a **Default boot**
notice by the partition name.
Version of ArubaOS software running on the partition.
Build number for the software version.
The label parameter can display additional information for the build. By default, this
value is the software build number.
Date the software build was created.
Licensing
Base operating system
Command Mode
Enable and Config mode on local and master
controllers
show image version | 1035