Dell PowerConnect W-7200 Series Reference Manual page 1044

Parameter
Encapsulation
loopback...
Configured
Jumpo support...
Negotiated
MTU bytes
BW is...
Last clearing of "show interface
counters"
link status last changed...
This port is...
POE status of the port is...
(host)#show interface gigabitethernet 1/0
Port InOctets
GE1/0 112670646
Port OutOctets
GE1/0 58342401
The output of this command includes the following parameters:
Parameter
Port
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
#show interface gigabitethernet 1/0 switchport
1044 | show interface gigabitethernet
Description
Encapsulation method assigned to this port.
Displays whether or not loopback is set.
Configured transfer operation and speed.
Jumbo frame support is enabled.
Negotiated transfer operation and speed.
MTU size of the specified port in bytes.
Bandwidth of the link.
Time since "show interface counters" was cleared.
Time since "show interface counters" was cleared.
Below the time, all current counters related to the specified port are
listed.
Whether or not this port is trusted.
The POE status of the specified port.
InUcastPkts InMcastPkts
1137507 907019
OutUcastPkts OutMcastPkts
170490
Description
Port number.
Number of octets received through the port.
Number of unicast packets received through the port.
Number of multicast packets received through the port.
Number of broadcast packets received through the port.
Number of octets sent through the port.
Number of unicast packets sent through the port.
Number of multicast packets sent through the port.
Number of broadcast packets sent through the port.
InBcastPkts
4983
OutBcastPkts
104 15373
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide