Dell PowerConnect W-7200 Series Reference Manual page 1340

show vpdn l2tp configuration
show vpdn l2tp configuration
Description
Displays the VPN L2TP tunnel configuration.
Syntax
No parameters.
Example
The output of this command shows the L2TP tunnel configuration.
(host) # show vpdn l2tp configuration
Enabled
Hello timeout: 30 seconds
DNS primary server: 10.16.15.1
DNS secondary server: 10.16.14.1
WINS primary server: 0.0.0.0
WINS secondary server: 0.0.0.0
PPP client authentication methods:
PAP
IP LOCAL POOLS:
vpnpool: 10.16.15.150 - 10.16.15.160
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
1340 | show vpdn l2tp configuration
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide