Dell PowerConnect W-7200 Series Reference Manual page 674

show ap arm state
show ap arm state [ap-name <ap-name>|dot11a|dot11g|ip-addr <ip-addr>]
Description
Display Adaptive Radio Management (ARM) information for an individual AP's neighbors, or show all available data
for any neighboring AP using an 802.11a or 802.11g radio type.
Syntax
Parameter
ap-name <ap-name>
dot11a
dot11g
ip-addr <ip-addr>
Usage Guidelines
The output of the show ap arm state command shows 802.11a and 802.11g information for all APs. Include an AP
name or IP address to show data for just a single AP, or use the dot11a or dot11g keywords to show data for all APs
using that radio type.
Examples
The output of this command shows 802.11a information for all neighboring APs.
(host)# show ap arm state
show ap arm state ap-name AP49
AP-1249:10.100.139.233:52:21:26-Edge:disable : Client Density:13
Neighbor Data
-------------
Name
----
AP42
AP09
AP48
The output of this command includes the following information:
Column
Name
IP address
SNR
674 | show ap arm state
Description
Show aggregate ARM Neighbor Information for a specific AP.
Show aggregate ARM Neighbor Information for all APs using an 802.11a radio.
Show aggregate ARM Neighbor Information for all APs using an 802.11g radio.
Show aggregate ARM Neighbor Information for a AP with a specific IP address by entering
its IP address in dotted-decimal format.
IP Address SNR Assignment
---------- --- ----------
10.100.139.249 41 52/21
10.100.139.224 22 56/21
10.100.139.241 36 60/21
Description
Name of an AP.
IP address of an AP.
Signal-to-noise (SNR) ratio. SNR is the power ratio between an information signal and the
level of background noise.
Neighbor Density
----------------
13/17/100/76
3/5/23/60
9/11/69/81
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide