Dell PowerConnect W-7200 Series Reference Manual page 662

The output of this command includes the following parameters:
Parameter
Virtual AP
Excluded Virtual AP
802.11a radio profile
802.11g radio profile
Wired AP profile
Ethernet interface 0
link profile
Ethernet interface 1
link profile
AP system profile
VoIP Call Admission
Control profile
802.11a Traffic
Management profile
802.11g Traffic
Management profile
Regulatory Domain
profile
RF Optimization profile
RF Event Thresholds
profile
IDS profile
Mesh Radio profile
Mesh Cluster profile
Excluded Mesh Cluster
profile
Related Commands
Configure AP settings using the command ap-name.
Command History
This command was available in ArubaOS 3.0.
662 | show ap-name
Description
Virtual AP profile that which configures a specified WLAN.
Excludes the specified mesh cluster profile from this AP.
Profile that defines 802.11a radio settings for the AP.
Profile that defines 802.11g radio settings for the AP.
Profile that defines wired port settings for APs assigned to the AP.
Profile that defines the duplex and speed of the Ethernet 0 interface on the AP.
Profile that defines the duplex and speed of the Ethernet 0 interface on the AP.
Name of the AP system profile for the AP.
Name of the AP system profile for the AP.
Name of the 802.11a WLAN traffic management profile for the AP group.
Name of the 802.11g WLAN traffic management profile for the AP.
Name of the regulatory domain profile for the AP.
Name of the RF optimization profile for the AP.
Name of the RF event thresholds profile for the AP.
IDS profile for the AP.
Mesh radio profile assigned to the AP.
Mesh cluster profile assigned to the AP.
Excludes the specified mesh cluster profile from this AP.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide