Dell PowerConnect W-7200 Series Reference Manual page 829

USB TTY device data path
USB TTY device control path
Link Priority Ethernet
Link Priority Cellular
Username of AP so that AP can authenticate to 802.1x using PEAP
Description
This command defines a provisioning profile for an AP or group of APs.
Syntax
Parameter
Remote-AP
Master IP/FQDN
PPPOE User Name
PPPOE Password
PPPOE Service Name
USB User Name
USB Password
USB Type
USB Device Identifier
USB Dial String
USB Initialization String
USB TTY device data path
USB TTY device control path
Link Priority Ethernet
Link Priority Cellular
Username of AP so that AP can authenticate
to 802.1x using PEAP
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
N/A
N/A
0
0
N/A
Description
Indicates that the profile is associated with a remote AP using
certificates.
The FQDN or IP address for the master controller.
PPPoE username for the AP.
Point-to-Point Protocol over Ethernet (PPPoE) password for the
AP.
PPPoE service name for the AP.
The PPP username provided by the cellular service provider
A PPP password, if provided by the cellular service provider
The USB driver type.
The USB device identifier.
The dial string for the USB modem. This parameter only needs
to be specified if the default string is not correct.
The initialization string for the USB modem. This parameter
only needs to be specified if the default string is not correct.
The TTY device path for the USB modem. This parameter only
needs to be specified if the default path is not correct.
The TTY device control path for the USB modem. This
parameter only needs to be specified if the default path is not
correct.
Set the priority of the wired uplink, from 0-255. Each uplink type
has an associated priority; wired ports having the highest
priority by default.
The priority of the cellular uplink, from 0-255. By default, the
cellular uplink is a lower priority than the wired uplink; making
the wired link the primary link and the cellular link the
secondary or backup link.
If your AP uses PEAP authentication, this field displays the AP
username.
show ap provisioning-profile | 829