Dell PowerConnect W-7200 Series Reference Manual page 1356

show wlan bcn-rpt-req-profile
show wlan bcn-rpt-req-profile<profile-name>
Description
Shows configuration and other information about the parameters for the Beacon Report Request frames.
Syntax
Parameter
<profile>
Usage Guidelines
Issue this command without the <profile> parameter to display the entire Beacon Report Request profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
For this profile to take effect, the 802.11K feature needs to be enabled.
Examples
(host) #show wlan bcn-rpt-req-profile
Beacon Report Request Profile List
----------------------------------
Name References
---- ----------
default 1
test 0
Total:2
(host) #
(host) #show wlan bcn-rpt-req-profile default
Beacon Report Request Profile "default"
---------------------------------------
Parameter
---------
Interface
Regulatory Class
Channel
Randomization Interval
Measurement Duration
Measurement Mode for Beacon Reports
Reporting Condition
ESSID Name
Reporting Detail
Measurement Duration Mandatory
Request Information values
The output of this command includes the following parameters:
1356 | show wlan bcn-rpt-req-profile
Description
Name of a WLAN advertisement p rofile.
Profile Status
--------------
Value
-----
1
12
9
100
100
active-all-ch
2
aruba-ap
Disabled
Disabled
0/21/22
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide