Show Usb - Dell PowerConnect W-7200 Series Reference Manual

show usb

crypto-local
show usb [cellular|ports|test|verbose]
Description
Display detailed USB device information.
Syntax
Parameter
cellular
ports
test
verbose
Examples
The USB Device table, in the example below, displays the USB port is in the 'Device Ready' state, meaning that the
port has passed the diagnostic test and is ready to send and receive data.
(host) (config-cellular new_modem)# show usb
USB Device Table
----------------
Address Product
------- -------
18 Novatel Wireless CDMA
ready
Below is an example of the show usb verbose display output (partial).
(host) #show usb verbose
...
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1410 ProdID=4100 Rev= 0.00
S: Manufacturer=Novatel Wireless Inc.
S: Product=Novatel Wireless CDMA
S: SerialNumber=091087843891000
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
...
Command History
Introduced in ArubaOS 3.4.
1294 | show usb
Description
Enter the keyword cellular to display cellular devices.
Enter the keyword ports to display detailed TTY port information such as signal
strength.
Enter the keyword test to test the USB TTY ports.
NOTE: Testing an invalid modem port may cause the controller to "hang". To
resolve this, unplug and re-plug the modem.
Enter the keyword verbose to display detailed USB information including serial
number and USB type.
Vendor ProdID Serial
------ ------ ------
1410 4100 091087843891000
Type
----
Cellular
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Profile State
------- -----
new_modem Device