Dell PowerConnect W-7200 Series Reference Manual page 771

Parameter
Reception of LLDP PDUs
Transmit interval (seconds)
Transmit hold multiplier
Optional TLVs
802.1 TLVs
802.3 TLVs
LLDP-MED TLVs
LLDP-MED network policy
profile
Command History
Command introduced in ArubaOS 6.2.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Shows if LLDP PDU reception is enabled on the AP.
The interval between LLDP TLV transmission seconds. The supported range is 1-3600
seconds and the default value is 30 seconds.
This value is multiplied by the transmit interval to determine the number of seconds to
cache learned LLDP information before that information is cleared.
If the transmit-hold value is at the default value of 4, and the transmit interval is at its
default value of 30 seconds, then learned LLDP information will be cached for 4 x 30
seconds, or 120 seconds.
The AP sends the listed optional TLVs in LLDP PDUs.
The AP sends the listed 802.1 TLVs in LLDP PDUs. By default, the AP will send all 802.1
TLVs.
The AP sends the listed 802.3 TLVs in LLDP PDUs. By default, the AP will send all 802.3
TLVs.
Lists the LLDP-MED TLVs the AP will send in LLDP PDUs. By default, the AP will not send
any LLDP-MED TLVs
Specifies the LLDP MED Network Policy profile to be associated with this LLDP profile.
Licensing
Base operating system.
Command Mode
Enable or Config mode on master or local controllers
show ap lldp | 771