Related Commands - Dell PowerConnect W-7200 Series Reference Manual

Related Commands

Command
remote-node-localip
remote-node-masterip
local-userdb-remote-node
show remote-node
show remote-node-dhcp-pool
show remote-node-profile
show local-userdb-remote-node
Command History
ArubaOS 6.0
ArubaOS 6.1
Command Information
Platform
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Configures security for all Remote Node and Remote
Controller control traffic
Configures security for the Remote Node master IP
address.
This command adds a Remote Node to the Remote
Node whitelist. You can also delete the whitelist
entry using this command.
Shows Remote Node configuration, dhcp instance,
license usage and running configuration information.
Shows Remote Node dhcp pool configuration
information.
Shows Remote Node profile status information.
The output of this command lists the MAC address
and assigned remote-node-profile for each Remote
Controller associated with that Remote Controller
master.
Modification
Command introduced.
The controller-ip loopback parameter was deprecated.
The following parameters were added:
ipv6
l
mgmt-server
l
mobility-manager
l
snmp-server
l
syscontact
l
syslocation
l
License
Available in the base operating system.
Mode
Enable and Config mode
Enable and Config mode
Enable and Config mode
Enable and Config mode
Enable and Config mode
Enable and Config mode
Enable and Config mode
Command Mode
Enable and Config modes on master
controllers.
remote-node-profile | 507