Dell PowerConnect W-7200 Series Reference Manual page 990

2009-03-02 18:13:09
2009-03-02 18:13:09
back in service.
2009-03-02 18:13:09
2009-03-02 18:13:09
back in service.
2009-03-02 18:13:09
Total number of entries in the queue
Related Commands
Command
clear fault <id>|all
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
990 | show faults
111 Authentication Server corp1-supersvr is down.
112 All authentication servers in server group sg-auth2 are brought
113 Authentication Server corp1-supersvr is down.
114 All authentication servers in server group sg-auth2 are brought
115 Authentication Server corp1-supersvr is down.
Description
Manually clear a single fault by specifying the
fault ID number, or clear all faults by including
the all parameter.
Licensing
Base operating system
:23
Command Mode
Enable and Config mode on master or local controllers.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
Config mode