Dell PowerConnect W-7200 Series Reference Manual page 954

Parameter
ip-mcast
destination
group
ip-reassembly
ap-name <ap-name>
counters
ip-addr <ip-address>
ipv4
ipv6
ipv6-mcast
destination
group
lag table
message-queue counters
maintenance counters
nat
network ingress
ap-name <ap-name>
counters
ip-addr <ip-address>
port
link-event
monitor
stats <slot/port>
status <slot/port>
954 | show datapath
Description
Displays the data path IP multicast table statistics. These include source, group.
VLAN and destination.
Displays the contents of the IP Reassembly statistics tables.
Name of the AP.
IP reassembly counters.
IP address of the AP
Displays the IPv4 contents of the IP Reassembly statistics table.
Displays the IPv6 contents of the IP Reassembly statistics table.
Displays the data path IP multicast table statistics. These include source, group.
VLAN and destination.
Displays contents of the datapath link aggregation group (LAG) or port channel
table.
Displays statistics of messages received by a CPU from other datapath CPUs (only
CPUs that receive messages and non-zero statistics are shown).
Displays datapath maintenance statistics.
Displays the contents of the datapath NAT entries table. It displays NAT pools as
configured in the datapath. Statistics include pool, SITP start, SIP end and DIP.
Displays ingress queue counters.
Name of AP.
Nat counters.
IP address of the AP.
Displays the datapath port table information. This includes the port number, PVID,
Ingress ACL, Egress ACL, Session ACL, and the following flags:
Q: trunk
l
T: trusted
l
B: blocked by the Spanning Tree protocol
l
L: LSG
l
M: tunneled node
l
X: xSec
l
Z: QinQ
l
Displays port link up and link down event counters.
Displays the monitor port configuration.
Displays the physical port statistics.
Displays the physical port status.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide