Usage Guidelines - Dell PowerConnect W-7200 Series Reference Manual

show rf am-scan-profile
show rf am-scan-profile [<profile-name>]
Description
Display the Air Monitor (AM) scanning profile list. Optionally display parameter and values of a specified Air
Monitor profile.
Syntax
Parameter
<profile-name>

Usage Guidelines

Enter the basic show command to view a list of profiles, the number of profiles and the profile status. For example:
(host) #show rf am-scan-profile
AM Scanning profile List
------------------------
Name References
---- ----------
default 9
north 0
Total:2
Example
In the example above, their are two profile names; default and north. The Reference column indicates the number of
references to this profile name. The Profile Status column is blank unless the profile is predefined.
Optionally, you can enter a profile name to view the parameters for that profile. For example:
(host) #show rf am-scan-profile default
AM Scanning profile "default"
-----------------------------
Parameter
---------
Scan Mode
Dwell time: Active channels
Dwell time: Regulatory Domain channels
Dwell time: non-Regulatory Domain channels
Dwell time: Rare channels
The explanation of the display output is described in the table below.
1220 | show rf am-scan-profile
Description
Name of this instance of the profile.
Profile Status
--------------
Value
-----
all-reg-domain
500
250
200
100
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide