Dell PowerConnect W-7200 Series Reference Manual page 1374

show wlan virtual-ap
show wlan virtual-ap [<profile>]
Description
Show a list of all Virtual AP profiles, or display detailed configuration information for a specific Virtual AP profile.
Syntax
Parameter
<profile>
Usage Guidelines
Issue this command without the <profile> parameter to display the entire Virtual AP profile list, including profile
status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has six configured Virtual AP profiles. The References column lists the
number of other profiles with references to the Virtual AP profile, and the Profile Status column indicates whether
the profile is predefined. (User-defined profiles will not have an entry in the Profile Status column.)
(host) #show wlan virtual-ap
Virtual AP profile List
-----------------------
Name
----
coltrane-vap-profile
default
MegTest
Remote
test-vap-profile
wizardtest-vap-profile
Total: 6
The following example shows configuration settings defined for the profile wizardtest-vap-profile.
(host) #show wlan virtual-ap test-vap-profile
Virtual AP profile "wizardtest-vap-profile"
----------------------------
Parameter
---------
AAA Profile
802.11K Profile
SSID Profile
Virtual AP enable
VLAN
Forward mode
Allowed band
Band Steering
Steering Mode
Dynamic Multicast Optimization (DMO)
1374 | show wlan virtual-ap
Description
Name of a Virtual AP profile
References
----------
1
1
1
1
Profile Status
--------------
Value
-----
default
default
default
Enabled
N/A
tunnel
all
Disabled
prefer-5ghz
Disabled
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide