Dell PowerConnect W-7200 Series Reference Manual page 634

show aaa state mux-tunnel
Description
Show multiplexter (MUX) tunnel IDs.
Syntax
No parameters.
Example
The example below shows statistics for one MUX tunnel
(host) #show aaa state mux-tunnel
Mux Tunnel Information
----------------------
IP
---------------
10.2.1.26
The output of this command includes the following parameters:
Parameter
IP
Tunnel ID
Slot/Port
AP Type
AP Name
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
634 | show aaa state mux-tunnel
Tunnel ID Slot/Port
--------------- ---------
125
Description
IP address of a multiplexer (MUX) server
ID number of a MUX tunnel.
The slot and port used by the controller, in the format <slot>/<port>.
<slot> is always 1, except when referring to interfaces on the W-6000M3 controller.
AP model type.
Name of an AP.
Licensing
Base operating system
AP Type AP Name
------- ------
Command Mode
Enable or Config mode on master and local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
1
AP16