show port xsec
show port xsec
Description
Displays the list of xSec enabled ports.
Syntax
No parameters.
Example
The output of this command shows the list of xSec enabled ports.
(host) #show port xsec
Xsec Ports
----------
Interface
xsec vlan
--------- --------- -----
Command History
This command was available in ArubaOS 3.3.2
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
state
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
show port xsec | 1185