Dell PowerConnect W-7200 Series Reference Manual page 986

show esi servers
show esi servers [{group-name <groupname>|{server-name <server-name>}]
Description
Show configuration information for ESI servers.
Syntax
Parameter
group-name
<groupname>
server-name
<server-name>
Usage Guidelines
By default, this command displays configuration settings for all ESI servers. You can include the name of an ESI
group to view servers assigned to just that group, or specify a server name to view information for that server only.
Example
This example below displays configuration details for the ESI server name forti_1.
(host) #show esi servers server-name forti_1
ESI Server Table
----------------
Name Trusted IP
---- ----------
forti_1 10.168.173.2
Flags
-----
U
Flags:
C :Datapath Download complete
U :Server Up
D :Server Down
PT:Trusted Ping response outstanding
PU:Untrusted Ping response outstanding
HT:Health Check Trusted IP
HU:Health Check Untrusted IP
FT:Trusted Ping failed
FU:Untrusted Ping failed
The output of this command includes the following information:
986 | show esi servers
Description
Include this optional parameter to display information for all ESI servers assigned to a specific
ESI group.
Specify an ESI server name to view configuration information for just that server.
Untrusted IP Trusted s/p
------------ -----------
10.168.171.3 -/-
Untrusted s/p Group
------------- -----
-/- default route
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode NAT Port ID
---- -------- --
0 4