Table of Contents
Advertisement
show aaa state station
show aaa state station <A:B:C:D:E:F>
Description
Display AAA statistics for a station.
Syntax
Parameter
<A:B:C:D:E:F>
Example
The example below shows statistics for a station with four associated user IP addresses. The output of this
command shows station data, the AAA profiles assigned to the station, and the station's authentication method.
(host) #show aaa state station 00:21:5c:85:d0:4b
Association count = 1, User count = 4
User list = 10.1.10.10 10.6.5.168 192.168.229.1 192.168.244.1
essid: ethersphere-wpa2, bssid: 00:1a:1e:8d:5b:31 AP name/group: AL40/corp1344 PHY: a,
ingress=0x10e8 (tunnel 136)
vlan default: 65, assigned: 0, current: 65 cached: 0, user derived: 0, vlan-how: 0
name: MYCOMPANY\tgonzales, role:employee (default:logon, cached:employee, dot1x:), role-how:
1, acl:51/0, age: 00:02:50
Authentication: Yes, status: successful, method: 802.1x, protocol: EAP-MD5, server: vortex
dot1xctx:1 sap:1
Flags: mba=0
AAA prof: default-corp1344, Auth dot1x prof: default, AAA mac prof:, def role: logon
ncfg flags udr 1, mac 0, dot1x 1
Born: 1233767066 (Wed Feb
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
MAC address of a station/
4 09:04:26 2009
Licensing
Base operating system
Command Mode
Enable or Config mode on master and local
controllers
show aaa state station | 635
Advertisement
Table of Contents
