Dell PowerConnect W-7200 Series Reference Manual page 596

Parameter
host
Admin-DN
Admin Passwd
Allow Clear-Text
Auth Port
Base-DN
Filter
Key attribute
Timeout
Mode
Preferred Connection
Type
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
596 | show aaa authentication-server ldap
Description
IP address of the LDAP server
Distinguished name for the admin user who has read/search privileges across all of the
entries in the LDAP database.
Password for the admin user.
If enabled, this parameter allows clear-text (unencrypted) communication with the
LDAP server.
Port number used for authentication. Port 636 will be attempted for LDAP over SSL,
while port 389 will be attempted for SSL over LDAP, Start TLS operation and clear text.
Distinguished Name of the node which contains the required user database.
Filter that should be applied to search of the user in the LDAP database (default filter
string is: ì(objectclass=*)î ).
Attribute that should be used as a key in search for the LDAP server.
Timeout period of a LDAP request, in seconds.
Shows whether this server is Enabled or Disabled.
Preferred type of connection to the server. Possible values are
Clear text
l
LDAP-S
l
START-TLS
l
Licensing
Base operating system
Command Mode
Enable or Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide