Dell PowerConnect W-7200 Series Reference Manual page 804

show ap mesh topology
show ap mesh topology [long] [page <page>] [start <start>]
Description
Show the mesh topology tree.
Syntax
Parameter
long
page <page>
start <start>
Example
An (N) in the Mesh Role column indicates the node is 11N capable. An (N) beside the parent name in the Parent
column indicates that the mesh node's the parent is also 11N capable.
(host) #show ap mesh topology
Mesh Cluster Name: sw-ad-GB32
-----------------------------
Name Mesh Role
---- ---------
Last Update
-----------
ad-ap Point (N)
6m:12s
msc-1 Point
6m:36s
Total APs :2
(R): Recovery AP. (N): 11N Enabled. For Portals 'Uplink Age' equals uptime.
The output of this command includes the following information:
Column
Name
804 | show ap mesh topology
Description
Include the names of a mesh portal's children in the output of this command
Limit the output of this command to a specific number of entries by entering the number of
entries you want to display.
Start displaying the mesh topology tree at a chosen index number by entering the index
number of the AP at which command output should start.
Parent Path Cost
------ ---------
Uplink Age #Children
---------- ---------
mp3 2
3h:8m:7s 0
mp3 2
2h:48m:12s 0
Description
Name of the mesh node.
Node Cost Link Cost
--------- ---------
0 0
0 0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Hop Count RSSI Rate Tx/Rx
--------- ---- ----------
1 61 300/270
1 64 54/54