Dell PowerConnect W-7200 Series Reference Manual page 591

show aaa authentication-server all
show aaa authentication-server all
Description
View authentication server settings for both external authentication servers and the internal controller database.
Usage Guidelines
The output of this command displays statistics for the Authentication Server Table, including the name and
address of each server, server type and configured authorization and accounting ports.
Examples
The following command shows information for the internal Authentication server, and another RADIUS server
named RADIUS-1.
(host) #show aaa authentication-server all
Auth Server Table
-----------------
Name Type
---- ----
Internal Local
server Ldap
server Radius
default Tacacs
The following data columns appear in the output of this command:
Parameter
Name
Type
FQDN
IP addr
AuthPort
AcctPort
AcctPort
Status
Requests
Command History
This command was introduced in ArubaOS 3.0.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
FQDN IP addr AuthPort
---- ------- --------
n/a 10.4.62.11 n/a
n/a 0.0.0.0 389
SRVR1 127.9.9.61 1812
n/a 127.9.10.61 49
Description
Name of the authentication server.
The type of authentication server. ArubaOS supports LDAP, RADIUS and TACACS+ servers,
in addition to its own local, internal authentication server.
The Fully-Qualified Domain Name of the server, if configured.
IP address of the server, in dotted-decimal format.
Port number used for authentication. An LDAP server uses port 636 for LDAP over SSL, and
port 389 for SSL over LDAP, Start TLS operation andclear text. The default RADIUS
authentication port is port 1812.
Accounting port on the server. The default RADIUS accounting port is port 1813.
Accounting port on the server.
Shows whether the Authentication server is enable or disabled.
Number of authentication requests received by the server.
AcctPort Status Requests
-------- ------ --------
n/a Enabled 0
n/a Enabled 0
1813 Enabled 0
n/a Enabled 0
show aaa authentication-server all | 591