Dell PowerConnect W-7200 Series Reference Manual page 1389

show wms counters
show wms counters [debug|event]
Description
Show WMS event and debug counters. If you omit the optional debug and events parameters, the show wms
counters command will display wms debug and events counters in a single table.
Syntax
Parameter
debug
events
Usage Guidelines
This command displays counters for database entries, messages and data structures. The counters displayed will vary
for each controller; if the controller does not have an entry for a particular counter type, it will not appear in the
output of this command
Example
This example shows part of the output of the command show wms counters.
(host) #show wms counters
Counters
--------
Name
----
DB Reads
DB Writes
Probe Table DB Reads
Probe Table DB Writes
AP Table DB Reads
AP Table DB Writes
STA Table DB Reads
STA Table DB Writes
Probe STA Table DB Reads
Probe STA Table DB Writes
Probe Register
Probe State Update
Set RAP Type
Set RAP Type Conf Level
...
Command History
This command was introduced in ArubaOS 3.0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show show debug counters only
Show events counters only. If you omit the debug and events parameters, the show wms
counters will display debug and events counters in a single table.
Value
-----
288268
350870
2477
952
143992
138867
40404
99687
101352
117566
2476
37077
42552
152
show wms counters | 1389