Show Cpuload - Dell PowerConnect W-7200 Series Reference Manual

show cpuload

show cpuload [current]
Description
Display the controller CPU load for application and system processes.
Syntax
Parameter
current
Example
This example shows that the majority of the controller's CPU resources are not being used by either application
(user) or system processes.
(host) #show cpuload
user 6.9%, system 7.7%, idle 85.4%
The output of this command includes the following parameters:
Parameter
user
system
idle
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Include this optional parameter at the request of Dell technical support to display
additional CPU troubleshooting statistics.
Description
Percentage of controller CPU resources used by application processes.
Percentage of controller CPU resources used by system processes.
Percentage of unused controller CPU resources.
Licensing
Base operating system
Command Mode
Enable or Config mode on master and local
controllers
show cpuload | 929