Dell PowerConnect W-7200 Series Reference Manual page 879

Column
Signal-strength
Duty-cycle
Add-time
Update-time
Related Commands
Command
ap spectrum local-override
rf dot11a-radio-profilemodespectrum-
mode
rf dot11g-radio-profilemodespectrum-
mode
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Strength of the signal sent from the device, in dBm.
Device duty cycle. This value represents the percent of time the device broadcasts a
signal.
Time at which the device was first detected.
Time at which the device's status was updated.
Description
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Licensing
Base operating system
Mode
Config mode on master or local
controllers
Config mode on master or local
controllers
Config mode on master or local
controllers
Command Mode
Enable or Config mode on master or local
controllers
show ap spectrum device-list | 879