Dell PowerConnect W-7200 Series Reference Manual page 757

show ap details
show ap details [advanced]{ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip6-
addr>}
Description
Show detailed provisioning parameters, hardware, and operating information for a specific AP.
Syntax
Parameter
advanced
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
ip6-addr <ip6-addr>
Examples
The example below shows part of the output for the command show ap details ap-name <ap-name>.
(host) # show ap details ap-name AP32
AP "AL39" Basic Information
---------------------------
Item
----
AP IP Address
LMS IP Address
Group
Location Name
Status
Up time
AP "AL39" Hardware Information
------------------------------
Item
----
AP Type
Serial #
Wired MAC Address
Radio 0 BSSID
Radio 1 BSSID
Enet 1 MAC Address
AP "AL39" Operating Information
-------------------------------
Item
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Include the following additional data in the output of this command:
switch message counts
l
AP group information
l
Virtual AP operating information
l
Show data for a specific AP by entering the name of the AP for which you want to display
information.
Show data for an AP with the specified BSSID. The Basic Service Set Identifier (BSSID) is
usually the AP's MAC address.
Show data for an AP with the specified IP address.
Show data for an AP with the specified IPv6 address.
Value
-----
10.6.1.206
10.6.2.253
corp1344
N/A
Up
4d:12h:47m:32s
Value
-----
125
AD0054972
00:1a:1e:c9:17:38
00:1a:1e:11:73:90
00:1a:1e:11:73:80
00:1a:1e:c9:17:39
Value
show ap details | 757