Dell PowerConnect W-7200 Series Reference Manual page 853

show ap spectrum ap-list
show ap spectrum ap-list {ap-name <ap-name>}|{ip-addr <ip-addr>}
ap-bssid <bssid>
channel <channel>
essid <essid>
limit <number>
or
page <number>
freq-band 2.4ghz|5ghz
sort <sort>
start <index>
Description
This command shows spectrum data seen by an access point that has been converted to a spectrum monitor.
Syntax
Parameter
ap-name <ap-name>
ip-addr <ip-addr>
channel <channel>
essid <essid>
limit <number>
or
page <number>
freq-band
2.4ghz|5ghz
sort <sort>
start <index>
Usage Guidelines
The Spectrum Analysis feature provides visibility into RF coverage, allowing you to troubleshoot RF interference and
identify 802.11 devices on the network. Issue this command to display and sort APs seen by a specific spectrum
monitor.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of the spectrum monitor for which you want to view spectrum information.
IP address of the spectrum monitor for which you want to view spectrum information.
View spectrum information for a specific radio channel.
View spectrum information for a specific ESSID.
Limit the displayed output to the specified number of entries
Use this parameter to display information that meets either of two criteria, such as a
specified ESSID or channel.
Enter a number from 10-100 (inclusive) to specify the number of entries that should appear in
each page of the output for this command. For example, if the output of this command has
100 entries and you select a page value of 20, the output will appear in 5 pages each with 20
entries. If you selected a page value of 10, the output would appear in 10 pages with 10
entries.
View information for a specific radio type, either 2.4 GHz or 5 Ghz.
Sort the output by the specified data column
Start displaying the output at specific spectrum index value.
show ap spectrum ap-list | 853