Table of Contents
Advertisement
show wlan ht-ssid-profile
show wlan ht-ssid-profile [<profile>]
Description
Show a list of all High-throughput SSID profiles, or display detailed configuration information for a specific High-
throughput SSID profile.
Syntax
Parameter
<profile>
Usage Guidelines
Issue this command without the <profile> parameter to display the entire High-throughput SSID profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured High-throughput SSID profiles. The References
column lists the number of other profiles with references to the High-throughput SSID profile, and the Profile
Status column indicates whether the profile is predefined. (User-defined profiles will not have an entry in the Profile
Status column.)
(host) #show wlan ht-ssid-profile
High-throughput SSID profile List
---------------------------------
Name
----
HT-profile1
Total:2
The following example shows configuration settings defined for the profile default2.
(host) #show wlan ht-ssid-profile default
High-throughput SSID profile "default2"
--------------------------------------
Parameter
---------
40 MHz channel usage
BA AMSDU Enable
High throughput enable (SSID)
Legacy stations
Low-density Parity Check
Maximum number of spatial streams usable for STBC reception
Maximum number of spatial streams usable for STBC transmission
MPDU Aggregation
Max received A-MPDU size
Max transmitted A-MPDU size
Min MPDU start spacing
Short guard interval in 20 MHz mode
Short guard interval in 40 MHz mode
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of a High-throughput SSID profile.
16default2
References
Profile Status
----------
--------------
1
Value
-----
Enabled
Enabled
Enabled
Allowed
Enabled
1
1
Enabled
65535 bytes
65535 bytes
8 usec
Enabled
Enabled
show wlan ht-ssid-profile | 1363
Advertisement
Table of Contents
