Dell PowerConnect W-7200 Series Reference Manual page 581

Configuration Option
Lockdown All Settings
Domain Suffix in VIA
Authentication
Enable Controllers
Load Balance
Enable Domain Pre-
Connect
VIA Banner
Reappearance Timeout
VIA Client Network
Mask
Validate Server
Certificate
VIA Client DNS Suffix
List
VIA max session
timeout
VIA Logon Script
VIA Logoff Script
VIA Support E-mail
Address
Maximum reconnection
attempts
VIA external download
URL
Allow user to
disconnect VIA
Comma Separated List
of HTTP Ports
Keep VIA window
minimized
Block traffic until
VPN tunnel is up
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
If enabled, all user options on the VIA client are disabled.
Enables a domain suffix on VIA Authentication, so client credentials are sent as
domainname\username instead of just username .
This option allows the VIA client to failover to the next available selected randomly from
the list as configured in the VIA Servers option. If disabled, VIA will failover to the next in
the sequence of ordered list of VIA Servers.
This option allows users with lost or expired passwords to establish a VIA connection to
corporate network. This option authenticates the user's device and establishes a VIA
connection that allows users to reset credentials and continue with corporate access.
The maximum time (in minutes) allowed before the VIA login banner reappears. Default:
1440 min
The network mask that has to be set on the client after the VPN connection is established.
Default: 255.255.255.255
Enable or disable VIA from validating the server certificate presented by the controller.
Default: Enabled
The DNS suffix list (comma separated) that has be set on the client once the VPN
connection is established.
Default: None.
The maximum time (minutes) allowed before the VIA session is disconnected.
Default: 1440 min
Name of the logon script that must be executed after VIA establishes a secure connection.
The logon script must reside in the client computer.
Name of the log-off script that must be executed after the VIA connection is disconnected.
The logoff script must reside in the client computer.
The support e-mail address to which VIA users will send client logs.
Default: None.
The maximum number of re-connection attempts by the VIA client due to authentication
failures.
Default: 3
End users will use this URL to download VIA on their computers.
Enable or disable users to disconnect their VIA sessions.
Default: Enabled
Traffic from the specified ports will be verified by the content security service provider.
Enable this option to minimize the VIA client to system tray during the connection phase.
Applicable to VIA client installed in computers running Microsoft Windows operating
system.
If enabled, this feature will block network access until the VIA VPN connection is
established.
show aaa authentication via connection-profile | 581