Dell PowerConnect W-7200 Series Reference Manual page 926

show control-plane-security
show control-plane-security
Description
Show the current configuration of the control plane security profile.
Syntax
No parameters.
Usage Guidelines
The control plane security profile enables and disables the control plane security feature and identifies campus APs
to receive security certificates. Issue this command to view current control plane security settings.
Example
The following command shows the control plane security and auto certificate provisioning features are enabled in the
control plane security profile, and that the controller will send certificates to a range of IP addresses:
(host)(config) #show control-plane-security
Control Plane Security Profile
------------------------------
Parameter
---------
Control Plane Security
Auto Cert Provisioning
Auto Cert Allow All
Auto Cert Allowed Addresses
Related Commands
Command
control-plane-security
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms
All platforms
926 | show control-plane-security
Value
-----
Enabled
Enabled
Disabled
10.1.1.16 - 10.1.42.55
Description
Configure the control plane security profile by identifying APs
to receive security certificates.
Licensing
Base operating system.
Command Mode
Enable mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
Config mode