show snmp trap-host
show snmp trap-host
Description
Displays the configured SNMP trap hosts.
Syntax
No parameters.
Example
The output of this command shows details of a SNMP trap host.
(host) # show snmp trap-hosts
SNMP TRAP HOSTS
---------------
HOST
----
10.16.14.1
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
1264 | show snmp trap-host
VERSION
SECURITY NAME
-------
-------------
SNMPv2c
public
Licensing
Base operating system
PORT
TYPE
TIMEOUT
----
----
-------
162
Trap
N/A
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
RETRY
-----
N/A