Table of Contents
Advertisement
show ap authorization-profile
show ap authorization-profile [<profile-name>]
Description
This command shows information for AP authorization profiles.
Syntax
Parameter
<profile-name>
Usage Guidelines
The AP authorization profile specifies which configuration should be assigned to a remote AP that has been
provisioned but not yet authenticated at the remote site. By default, these yet-unauthorized APs are put into the
temporary AP group authorization-group and assigned the predefined profile NoAuthApGroup. This configuration
allows the user to connect to an unauthorized remote AP via a wired port then enter a corporate username and
password. Once a valid user has authorized the AP and the remote AP will be marked as authorized on the network.
The remote AP will then download the configuration assigned to that AP by it's permanent AP group.
Issue this command without the <profile-name > option to display the entire AP authorization profile list,
including profile status and the number of references to each profile. Include a profile name to display the
authorization group defined for that profile.
Examples
The following example lists all AP authorization profiles. The References column lists the number of other profiles
with references to that authorization profile, and the Profile Status column indicates whether the profile is
predefined. User-defined AP authorization profiles will not have an entry in the Profile Status column.
(host) #show ap authorization-profile
AP Authorization profile List
-----------------------------
Name
----
Noauthprofile 1
default
Total:2
To display the authentication group for an individual profile, include the <profile> parameter. The example below
shows the profile details for the AP authorization profile Default.
(host) #show ap authorization-profile default
AP Authorization profile "default" (Predefined (editable))
----------------------------------------------------------
Parameter
---------
AP authorization group
The output of the show ap authorization command includes the following parameters:
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
The name of an an existing AP authorization profile.
References
Profile Status
----------
--------------
2
Predefined (editable)
Value
-----
NoAuthApGroup
show ap authorization-profile | 681
Advertisement
Table of Contents
