Dell PowerConnect W-7200 Series Reference Manual page 737

show ap debug radio-stats
show ap debug radio-stats {ap-name <ap-name>|ip-addr <ip-addr>} radio {0|1} [advanced]
Description
Show aggregate radio debug statistics of an AP.
Syntax
Parameter
ap-name <ap-name>
ip-addr <ip-addr>
radio {0|1}
advanced
Example
The output of this command displays general statistics for the radio, as well as statistics for transmitted and received
frames.
(host) #show ap debug radio-stats ap-name AP12 radio 1
RADIO Stats
-----------
Parameter
---------
-------------------
Total Radio Resets
Resets Beacon Fail
TX Power Changes
Channel Changes
Radio Band Changes
Current Noise Floor
11g Protection
-------------------
Frames Rcvd For TX
Tx Frames Dropped
Frames Transmitted
...
If you include the advanced option at the end of the show ap debug radio-stats command, the output of this
command will include all the following parameters. If you omit the advanced option, the output will include less
information, and the data will be displayed in a different order.
Parameter
Total Radio Resets
Resets Beacon Fail
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show log information for an AP with a specific name.
Show log information for an AP with a specific IP address by entering its IP address in
dotted-decimal format.
Specify the ID number of the radio for which you want to view statistics.
Include this parameter to display additional radio statistics.
Value
-----
General Per-radio Statistics
0
0
5
2
0
95
0
Transmit specific Statistics
2452151
1736429
4247212
Description
Total number of times the radio reset.
Number of times the radio reset due to beacon failure.
show ap debug radio-stats | 737