Dell PowerConnect W-7200 Series Reference Manual page 629

Parameter
non-ip
zero-ip
loopback
mac mismatch
spoof
drop
ncfg
Non-auth opcode
No-l2-user
l2tp
vrrp
special mac
iap
idled users
idled users due to
MAC mismatch
Idled users due to SOS
wireless tunnel
wireless dtunnel
wired tunnel
wired dtunnel
Other
Idled users due STM deauth
tunnel
dtunnel
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Number of non-IP type packets sent between the datapath and the controlpath.
Number of packets sent without an internet protocol (IP).
If 1, the controller has a defined loopback address. If 0, a loopback address has not yet
been configured.
Number of users that were not authenticated due to MAC mismatches.
Number of users that were not authenticated due to spoofed IP addresses.
Number of user authentication attempts that were dropped.
Number of packets sent between datapath and controlpath, where the authentication
module has not completed the initialization required to process the traffic.
Number of packets whose opcode is non-auth opcode. This is a check to find if auth is
responsible for processing received packet.
Number of user packets dropped due to absence ofan L2 entry for the user.
Number of l2tp users.
Number of VRRP users.
Number of users with a special MAC address.
Number of instant AP users.
Number of inactive stations that are not broadcasting data to an AP.
For internal use only.
Number of wireless users in tunnel forwarding mode that were aged out by the controller.
Number of wireless users in decrypt tunnel forwarding mode that were aged out by the
controller.
Number of wired users in tunnel forwarding mode that were aged out by the controller.
Number of wired users in decrypt tunnel forwarding mode that were aged out by the con-
troller.
Number of users using modes other than tunnel or decrypt tunnel aged out by the con-
troller.
Number of users in tunnel forwarding mode that aged out after STM deauthentication, and
timer expiration.
Number of users in decrypt tunnel forwarding mode that aged out after STM deau-
thentication, and timer expiration.
show aaa state debug-statistics | 629